Holliston Firearms

How to Shorten a Shotgun Barrel?

The shotgun barrel is a firearm barrel that has an bore, or the internal metal tube of the gun, and the muzzle. The length may vary according to design and use. However, it’s general length ranges from about 50cm (20 inches) for a smoothbore shotgun and up to 90 cm (35 inches) for a rifled slug barrel.

If you want to shorten your shotgun barrel you can cut it with a hacksaw or by using tin snips. You can also use a cutting torch or a very expensive tool that is designed to cut metal. It will use electric power to heat the metal up to a high temperature and then, when it is glowing red, you can make the cut.

Measure Properly Before Shorten Your Shotgun Barrel:

If you’re not sure how to measure the length of a shotgun barrel, use duct tape and measure it by sticking it to your shotgun. When taking a measurement of a shotgun barrel, make sure to take a measurement from the muzzle to the end of the barrel including any chokes or other modifications. This article will show you how to shorten a shotgun barrel. You may be asking yourself “Why would anyone want to shorten their shotgun barrel?” Well, if you’re in an area where having a longer barreled weapon is illegal, you can shorten your shotgun’s barrel down from 20 inches down to 18 inches or less with minimal difficulty.

The most common length of shotgun barrel is 20 inches. The shotgun has a 20-inch barrel. It also has a muzzle brake and a screw-on choke made for turkey hunting. If you want to shorten your gun barrel you can remove the muzzle brake or add a new one (depending on your local laws). You can then add a choke that is more appropriate for use with clay pigeons.

7 Steps/Way You Can Follow To Shorten a Shotgun Barrel:

  1. Cut the barrel from the muzzle end with a hacksaw or tin snips. You can make your cut in stages, cutting off about an inch at a time and then checking if it fits your gun and that you did not damage any other part of the gun.
  2. Make sure that the barrel is pushed all the way back into the gun .
  3. You can then remove some metal from the front of the barrel with a hacksaw or tin snips.
  4. You can also make the cut in stages, cutting off about an inch at a time and then checking if it fits your gun and that you did not damage any other part of the gun.
  5. You can also use a cutting torch to cut the barrel. It’s best to wait until the barrel has cooled down, so you don’t burn yourself on the hot barrel.
  6. Heat up the part of the barrel that you want to remove with the tip of the torch and then push it into your cutting tool and then turn off the flame of your torch and pull them apart.
  7. Lastly, grind away any sharp edges on both sides of your new shortened shotgun barrel with a file or set of sandpaper.

Should You Use a Cutting Torch To Cut a Shotgun Barrel?

It is possible to use a torch to cut a shotgun barrel but not recommended unless you have a very good reason for doing so. If you do not in-fact have a torch, you can use a metal cutting wheel on your drill to cut it. You will need to use a very good cutting wheel and the correct size drill bit for the size of the barrel you’re shortening.

Use a Dremel tool with high speed metal cutting wheel to cut shotgun barrels. This is the most common method used, and will work fine for all shapes and sizes of barrels.

In conclusion, It’s important to remember that you should always double-check your work before finishing it. In addition, you might want to double-check your work before firing the shotgun with the shortened barrel. If your barrel didn’t fit correctly, it could damage the shotgun and put you in an embarrassing situation.

Best Buffalo Gun Safe Reviews [2022]

Today we’ll discuss about best Buffalo gun safe. Buffalo Gun Safe is a company located in Buffalo NY that deals with gun safes. They manufacture their products, sell them across the nation and provide gun safe installation services for clients that need their home or business defense needs met.

The company’s motto is “How good is your safe?” If you can’t say with certainty- “it’s too good to be true!”

As a brand of excellence, Buffalo Gun Safe recognizes its obligation to exceed both customer and business expectations. The company focuses on quality at all steps in the production of their gunsafe. This ensures that their products are durable and safe for those who use them daily as well as those who use them for those unfortunate events such as robberies or natural disasters.

Editor’s Pick – Best Buffalo Gun Safe Reviews

[tablesome table_id=’182’/]

Buffalo 1015 Gun Rifle Shotgun Metal Small Security Cabinet Safe Storage with Separate Pistol/Ammo Area

Buffalo 1015 Gun Rifle Shotgun Metal Small Security Cabinet Safe Storage with Separate Pistol/Ammo Area

If you’re looking for a different way to keep your valuables secure, consider the Buffalo 1015 Gun Rifle Shotgun Metal Small Security Cabinet Safe Storage with Separate Pistol and Ammo Area safe. With features like a 24-hour digital timer and an optional lock, this safe is as versatile as it is reliable.

Buffalo’s small sized metal gun safe offers a unique design and durability for homeowners and professionals who need a small-sized security storage solution. This gun safe has a standard size of 43.25″ H x 8.5″ W x 6.0″ D. Interior: 42.25″ H x 8.0″ W x 5.5″ Deep and comes with the option of either using the key pad combination or key button lock to secure your firearms; however, if you purchase the optional bolt cutters, you can also open this unit quickly and easily.

Features:

  • This gun cabinet is already assembled and can hold up to one rifle or shotgun. It’s adjustable and can be adjusted.
  • The height-adjustable shelf can be placed in two different positions. One of them is the maximum length of your rifle should be not more than 32.5 inches.
  • Completed with two key screws. Anchor holes for fixing the safe to the wall.

Your weapon collection will be protected by moisture and dust. This metal gun cabinet is outfitted with a storage compartment. This conversation is about rifle and pistol storage. The gun storage unit has compartments that can be adjusted to store rifles and pistols.

Additional features of the fixed height shelf are that, The maximum length of your rifle should not exceed 32.5 inches. The unit has two locks for protection. This gun safe can hold one long weapon up to 42″ tall without a height-adjustable shelf. Anchor holes are available to fix the safe to the wall.

Buffalo 1115 Gun Rifle Safe Storage Cabinet Key Lock with Separate Shelf for Handguns Ammo

Buffalo 1115 Gun Rifle Safe Storage Cabinet Key Lock with Separate Shelf for Handguns Ammo

Its ideal for small spaces to keep your guns, ammo or valuables. This gun safe is perfect if you have children in the home who are curious about your gun collection. It’s great for home, office or cabin because it can be mounted on the wall to keep out of reach of children. This gun safe is small enough to fit under your desk or anywhere in your home or office.

This product is for the first time gun owner looking for a safe place to store their guns. The Buffalo 1115 Gun Rifle Safe Storage Cabinet Key Lock with Separate Shelf for Handguns Ammo comes with two keys and is perfect for storing handguns, ammo, jewelry, important documents and any other items that you want to protect from children or other people who should not be accessing them.

It is small enough that it can be placed under your desk or in any other spaces in your home or office. The gun safe provides easy access to the contents of the container while ensuring that they are out of reach of young children.

Features:

  • The height of the safe inside is 42.25 inches.
  • The exterior of the safe is white and it has a padlock on the front. The inside of the safe is a light grey color with a metal shelf.
  • Buffalo Gun Rifle Safe Storage Cabinet Key Lock with Separate Shelf for Handguns Ammo holds 1 rifle or shotgun up to 42″ tall without a height-adjustable shelf. Height-adjustable shelf can be placed in 2 positions.
  • In the first position, the total length of your rifle should not go above 32.5 inches.
  • With two locking bolts. It has fixing points for anchoring the safe to the wall.
  • The safe is 42.25 inches tall inside, and your rifle can be up to 55.25 inches long without the need for a height.

Protect your guns from dust and moisture. This storage gun cabinet is made of metal. The rifle and pistol cabinet is adjustable to suit different heights. Additionally, this adjustable shelf can be situated in any one of two positions. In the first hand, a rifle should be no longer than 32.5 inches. As the second position the maximum length of your rifle should be not more than 37 inches.

This unit possesses two key locks for assurance. This gun safe is able to house one long weapon up to 42″ tall without a height-adjustable shelf. There is a placement for mounting the safe to the wall. You can proudly display the firearm cabinet in nearly any room in your home. It is not hefty. The book is slim enough to fit in most spaces. No need to worry, your guns are safely out of the way.

Buffalo 1325 Gun Rifle Shotgun Metal Security Cabinet Safe Storage

Buffalo 1325 Gun Rifle Shotgun Metal Security Cabinet Safe Storage with Separate Lock Box for Handguns Ammo is a metal cabinet that is armed with multiple locks for different settings. It has three individual lock boxes so you can store all of your firearms in one place with ease.

Apart from the security, this safe is also stylish with an elegant stainless steel finish. This safe will be easy to match up to your home, business, or other environment in style and function.

Features:

  • Gun rifle shotgun ammo locker.
  • Gun cabinet is made of metal, doors have three separate locks.
  • Comes fully assembled and ready to use.
  • Safe has separate storage areas. The area for handguns/ammunition is located in the front of the cabinet.
  • Longer guns can be stored in the back of the cabinet if anchor holes are available.

When it comes to protecting your firearms and ammunition from damage, there are many steps that need to be taken. Maintaining a clean and the gun security cabinet has two separate storage areas, one for rifles and one for pistols. This lock prevents being opened without the key, which has three live-locking bolts. This gun safe has the capability of holding two long guns up to 50.3 inches in height.

It has a special unit which provides storage space for accessories and ammunition. Longer guns can be stored in the back of the cabinet as long as there is a lock box positioned in the front. There are anchors just for sticking the safe to the wall. You may display this gun cabinet with pride in virtually any atmosphere of home.

Buffalo 1320 Gun Safe 3 Rifle Shotgun Large Metal Security Cabinet Safe Storage

Buffalo 1320 Gun Safe 3 Rifle Shotgun Large Metal Security Cabinet. The unit is constructed of Powder Coat finish over solid steel, aluminum or wood construction. The combination lock feature allows for two separate combinations to be set.

This provides greater security when you are storing large amounts of ammunition, rifles, shotguns and handguns in one safe at your home or business location. This unit has a tough exterior that will stand the test of time while still providing you with all the benefits that come with owning a Buffalo brand gun safe.

The gun safe comes with a plastic rack that slides into the unit. This rack is designed to hold the rifles, shotguns and handguns securely in place. The racks allows you access to your firearms quickly and easily.

The unit features keyless entry which allows you to easily open the safe without having to carry around a separate key or combination lock combination,. This gives you even more convenience when access to your firearm is needed.

Features:

  • It is important to measure your rifle’s length and compare it to the safe dimensions.
  • This cabinet assembles. It can hold up to three rifles or a shotgun of up to 50.3″ in height.
  • Dimensions: Height: 52.4 inches, Width: 11.8 inches, Depth: 7.9 inches
  • Please compare the safe length of your rifle with your body size.
  • The handgun ammunition storage area is the front of the cabinet.
  • Anchor holes can be used to fix the safe to the wall.

You can protect your valuable collection of weaponry from an array of troublemakers, including moisture and dust. This metal gun security cabinet provides three separate storage areas for rifles and pistols. The unit is made with two key locks for safety. Each key lock features three live bolts.

Bolt locks that are live provide an even more advanced method of protection against theft. This gun safe is capable of housing three long weapons up to fifty-three inches tall. This has a separate lock box that provides additional storage for accessories and ammunition. This gun cabinet is easy to display in any home, and its slim design makes it unobtrusive. Knowing your weapons are secure.

Buffalo 1520 Two Doors Gun Rifle Shotgun Metal Security Cabinet Safe Storage

The Buffalo 1520 Two Doors Security Cabinet with Separate Lock Box for Handguns and Ammo is a big space-saving gun safe that has bottom doors.

The cabinet has a movable tray with 12 preloaded high capacity magazines. The tray is clearly marked and labeled so you know which magazines you’re using. The metal cabinet also has an on/off switch on the top that will turn the power off and on when needed.

There is a large lockable hinge at one of the doors that gives you quick access to your weapon while keeping it secure in its place, while there’s also another locking hinge at the other door for protection of your ammunition.

Features:

  • Please, check out what is the distance between your rifle and your shoulder.
  • This rifle cabinet comes preassembled. It lets us store 4 rifles or shotguns which are up to 50″ tall.
  • Dimensions of the lockbox are 59 inches tall, 11.8 inches wide, 7.87 inches deep, and 6.5 inches wide.
  • Compare the size of the firearm you are using with this model.
  • A safe with two doors is safer than one with one door. Two separate areas to store things in makes the item more secure.
  • These three locks provide more advanced protection against theft.

You can protect your valuable collection of weaponry from a variety of elements, including moisture and dust. Two boxes with three locks are designed to protect you gun. This security cabinet comes complete, This safe is equipped with three storage compartments. The unit is constructed with three locks, each locked by three bolt solutions.

New locks provide advanced protection against theft. This gun safe will accommodate four long weapons up to 50″ high. Your presence in an almost any room in your house. It is thin enough to fit in most spaces. You can sleep soundly knowing your guns are securely locked away.

In conclusion, if you’re looking for a gun safe to protect your loved ones and precious belongings, we recommend the Buffalo Gun Safe. The safe is able to store up to 44 firearms along with ammunition and other valuables. It also has an interior light to illuminate items stored inside, as well as a lock that can be programmed for different users.

If you want more than just a middle-of-the-road gun safe, then we encourage you take a look at the Buffalo Safe.

Best Pocket Holster for Jeans [2022]

Active lifestyles require clothing that can do more. The pocket holster for jeans provides that utility when moving from jeans to dress slacks. It is the only one that provides hands-free carry in a fashionable way. No more bulky pockets.

In the days of jeans, there were no holsters. It was a matter of either sitting down and trying to stuff your gun into a pocket and stuffing it under your belt, or trying to carry it in the waistband which we all discovered was not very comfortable for extended periods. Trying to carry in the waistband could result in the loss of your pants or worse, a quick trip to the ER. While sitting down with your pants over your gun was not much better, it would be easier to sit down at all if you were not wearing them.

As for pocket carry, you either had to have a double-barrel gun in an extremely large pocket or carry two two-gun sets in one pocket. This was really awkward and inefficient. So, That’s why I guess our below recommendations on gun holsters for your jeans will help you.

[tablesome table_id=’138’/]

# Tips for Gun Pocket Carry:

– Dedicated pocket: One of the best ways to ensure you can still reach your gun in an emergency is by using a pocket specifically designed for carrying firearms. If you’re going for a concealed carry weapon, that means checking out all the options and making sure they fit.

– Keep your gun and gear separate: Before reaching into your pocket, remove any loose items, such as keys and cellphones. This will keep individuals from grabbing them if they’re startled by something.

– Practice with your gun in your pocket: It’s best to practice drawing in a safe environment until you are familiar with the process.

– Time it right: Drawing in a flash is simply not possible when carrying your weapon in your pocket. Instead, practice getting to your gun quickly when you’re not trying to conceal it. This is especially important for concealed carriers who might have to draw quickly.

1. Vedder Holsters Pocket Locker Kydex Pocket Holster – Ruger LCP:

The Vedder Holsters Pocket Locker Kydex Pocket Holster accommodates most Ruger LCP models with a simple design. It also features adjustable retention and offers a sturdy construction for reliable performance. The holster is compact and easy to conceal, lightweight and completely compatible with belt or pocket carry options.

The holster is made from a durable injection molded polymer that is both lightweight and tough enough to withstand rough use. In addition, the holster can be molded into various shapes to fit most guns with a smooth, contoured design that minimizes printing even when your gun is being worn. The Vedder Pocket Locker Kydex Pocket Holster includes a thumb break retention system for positive retention of your gun.

This carry holster is perfect for people who don’t want to wear a belt and carry their gun in the waistband. This holster is only for small-framed guns or pocket pistols. The holster can be clipped to your front pocket. Each holster is custom-fitted to your unique gun model ensuring a perfect fit. Drawing your firearm from your pocket can be tricky.

The hook of the holster may snag on the lower part of the pants and cause you to needlessly draw your gun. The Pocket Locker splits in two parts for both right and left-handed individuals. You can flip the holster on the left or right, but whichever pocket you carry it is.

A sweat guard is also found on every model. The slide, or the part that goes in between the barrel and handle, is covered with a special material called a sweat guard to prevent water.
The metal barrel of the gun is completely enclosed to prevent dirt, dust, and debris from getting trapped between the individual folds.

2. Gunhide, Nemesis Pocket Holster, Fits SIG P365, Ambidextrous, Black:

Gunhide, Nemesis Pocket Holster

Gunhide has created a stylish holster that’s perfect for the SIG P 365. Each Nemesis comes with a durable injection-molded nylon construction, available in either black or tan. The Nemesis is lightweight and slim, so it isn’t going to be a burden as you carry your P365. The holster is designed as an outside the waistband holster, so you can wear it all day long with comfort and ease, though if you prefer to carry concealed, Gunhide does provide a belt clip that attaches the holster to your belt.

The Gunhide Nemesis holster features a unique two piece design that allows for adjustment of retention levels depending on how you choose to wear the holster.

Features of Gunhide, Nemesis Pocket Holster:

  • The height of the item in this package is 1.5″
  • Package length is 10.0″
  • Package Length Of The Item Is 6.0″

3. Allen Spiderweb Holster for Inside the Pocket Concealed Carry:

Allen Spiderweb Holster for Inside the Pocket Concealed Carry

The Allen Spiderweb Holster has a lot of good things going for it. It is comfortable and the gun still looks like a wallet or phone when in your pocket. This is a great holster if you’re looking for something that will be hidden and comfortable. The Spiderweb Holster is the perfect concealed carry holster that looks like a wallet or phone. With its slim profile, it slips into pockets easily and keeps your pistol safely stored away until you need it. Ideal for deep pocket carry in tactical.

The Spiderweb holster features a sticky, raised web pattern that holds your firearm securely inside your pocket. This pattern of texture prevents the holster from moving within your pocket as you go about daily activities. It also keeps the holster firmly inside your pocket when you need to draw it.

Features of Allen Spiderweb Holster:

  • Made to fit up to 2″ barrel revolvers
  • Available for .380 acp to fit laser sights
  • Ambidextrous design
  • 2-3 inch revolver

4. Sticky Holsters MD-4 Medium:

Sticky Holsters MD-4 Medium

This holster has an outside made from a material that sticks to clothes and other surfaces. All you have to do is put some pressure on the gum, and it’ll stick onto your clothes, bringing at least your waistband, or even bare skin.

The Sticky Holster is not only effective for pocket carrying, but also works as a tuckable inside the waistband (IWB). You may tuck them inside your waistband of your jeans, yoga pants, sweatpants, or running shorts. The Sticky Holster doesn’t have a clip, so you don’t need a belt. The underwear sticks to the skin and waistband, so it does not move when you do!

Features of Sticky Holsters MD-4 Medium:

  • Suitable for Single Stack Subcompact Medium Auto’s with barrel length up to 3.6″.
  • Sticky Holsters Inc. stands by the quality of its products, made 100% In The USA.
  • This satisfies both righties and lefties.

5. ComfortTac Ultimate Pocket Holster – Ultra Thin for Comfortable Concealed Carry:

ComfortTac Ultimate Pocket Holster

The ComfortTac Ultimate Pocket Holster is designed to be ultra thin, sleek, and comfortable. It can fit in your pocket or bag for concealment. The ComfortTac holster uses ballistic nylon for durability and easy-adjusting self-latching hooks that are quick on or off.

The Ultimate Pocket Holster features a belt attachment and a pocket attachment. Attach the holster to your belt with the bungee strap and you will be ready to go fast. The pocket attachment allows you to carry the ComfortTac holster on the inside of your jacket, purse, or bag as a handy hand-held concealment device.

The ComfortTac pocket holster is inexpensive, unobtrusive, and easy to use.

Features of ComfortTac Ultimate Pocket Holster:

  • Made of neoprene, lightweight and effective for concealed carry.
  • The holster measures 6″ tall by 4″ wide to be compatible with a wide range of compact pistols.
  • Carry your firearm in either your left or right pocket.
  • The suede-like lining provides a smooth draw while the suede-like exterior grabs the pocket to ensure the holster stays in your pocket.

6. Ace Case KEL-TEC P-32 Pocket Holster – Made in U.S.A.

Ace Case KEL-TEC P-32 Pocket Holster

Ace Case is proud to be a U.S. based company with a strong commitment to product development, quality, and innovation. We do not believe in quick-buck tactics, but rather in creating products that will outlast generations of shooters.

Ace Case is one of the most technologically advanced holster design companies with an extensive line of holsters that cater from everyday concealed carry to tactical applications for military members and law enforcement officers worldwide.

The Ace Case KEL-TEC P-32 Pocket Holster is a molded, injection-molded, synthetic rubber holster that fits the KEL-TEC P-32 semi automatic pistol. It carries the firearm in a vertical position and will not carry a spare magazine.

The design of this holster also features a tension adjustment screw to make drawing easier or more difficult simply by turning the screw to your preference. This method is perfect for law enforcement or military personnel who want to fine tune their carry settings.

Features of Ace Case KEL-TEC P-32 Pocket Holster:

  • 100% All-American Made Gun Holster
  • Ruger LCP (no laser)
  • Buy Nylon, Black, Fully Lined
  • Designed for relatively petite pistols that are meant to be fit in small pockets.

7. Garrison Grip Custom Fit Leather-Trimmed Poly Pocket Holster Fits Ruger LCP 380 (B):

Garrison Grip Custom Fit Leather-Trimmed Poly Pocket Holster

The Garrison Grip Custom Fit Leather-Trimmed Poly Pocket Holster Fits Ruger LCP 380 (B) is a simple and effective way to pack and protect your gun without carrying it on your person. The holster is made of leather and features a molded design to fit the Ruger LCP 380 (B). The Garrison Grip also includes two retention screws for adjusting the tension level.

The following options are available for the Garrison Grip Custom Fit Leather-Trimmed Poly Pocket Holster Fits Ruger LCP 380 (B)

Features of Garrison Grip Custom Fit Leather-Trimmed Poly Pocket Holster:

  • The ambidextrous orGUNizer Pocket Holster is extremely effective.
  • Each of our holsters are designed to fit your firearm perfectly.
  • Only the best and most practical materials are used, including leather trim work for both strength and flexibility.
  • The wide base of the holster will maintain the firearm in an upright position. The holster also conforms to your thigh.

8. Uncle Mike’s Off-Duty and Concealment Nylon OT Inside-The-Pocket Holster:

Uncle Mike's Off-Duty and Concealment Nylon OT Inside-The-Pocket Holster

Uncle Mike’s Off-Duty and Concealment Nylon OT Inside-The-Pocket Holster is a unique holster that provides the same concealability as a traditional IWB or OWB holster without compromising comfort.

This new holster features an inside the pocket design, which enables it to be worn comfortably underneath clothing. It also features an adjustable belt clip for users with different waist sizes. The clip allows users to easily position this holster on their belt under their shirt or jacket.

The convenience of this new design is unmatched by any other IWB or OWB holsters on the market today.

Features of Uncle Mike’s Off-Duty and Concealment Nylon OT Inside-The-Pocket Holster:

  • Laminating reduces print-through recognition, cushions your leg, and blocks sweat.
  • Open-top holster prevents the movement of levers, buttons, or catches that are common to loose pocket carry.
  • Non-slip band holds holster in pocket when gun is drawn.
  • Gun is upright when carrying, and it’s protected from lint/debris in the pocket.
  • Open-top holster positioning prevents gun levers, buttons or catches from moving when in pocket.

9. Galco PH158 Front Pocket Holster:

Galco PH158 Front Pocket Holster

Galco is an American company that produces concealed carry holsters, gun belts, and other products. The company’s founder began his career as an engineer at the Crayola Company. He started designing customized holsters for celebrities, including Arnold Schwarzenegger and Sylvester Stallone.

The products of Galco are durable and consistent in their quality over time which makes them popular with many customers who use them for self-defense purposes.

The Galco PH158 front pocket holster is designed to be comfortable throughout the day. The design of the holster does not change shape to one’s body, even with long periods of use.

The holster is made of premium saddle leather and is handcrafted by a group of craftsmen who have been making holsters for over a decade. The Galco PH158 front pocket holster is designed as a front pocket holster as its name suggests.

Pocket carrying a handgun allows you to take it just about anywhere, and the benefits of this form of carry are that it is fast and easy. Not only is the handgun completely covered and concealed, but the gun carrier can casually place a hand on the holstered/pocketed gun. If the threat is identified and recognized, then having a gun in hand can be incredibly helpful.

Features of Galco PH158 Front Pocket Holster:

  • Front pocket holster for guns.
  • It allows for quick release of gun from both pockets and holsters.
  • The holster accomplishes this by hooking your pocket corner and catching a screw on the top.

10. Gould & Goodrich 702-1 Concealment Wallet Holster:

Gould & Goodrich 702-1 Concealment Wallet Holster

The 702-1 Concealment Wallet Holster is the perfect way to keep your gun safely concealed. Made from durable, waterproof, and lightweight material. This holster allows you to carry all types of firearms and it’s great for those with back problems. This product is designed to fit most guns.

There are several pros and cons to this holster. The first thing that we noticed about the 702-1 Concealment Wallet Holster is that it’s extremely lightweight and can easily be carried in just about any pocket without you noticing it at all. This makes it great for concealed carry for those who need or want an easy-to-conceal design on their holster.

Features of Gould & Goodrich 702-1 Concealment Wallet Holster:

  • If you prefer a right hand draw, you’ll need to get the left hand version of this wallet holster.
  • The holster fits nicely into my Levi jeans pocket but for about 1/2 inch below the edge.

As we believe you will find the best pocket holster for jeans. What we’ve found online by researching this topic we’ve tried to listed above.